Ribs are usually created using a simplex foil. The ones running parallel to the motorstick are called ribs, and are usually curved (cambered) to increase the lift of the wing. The front spar is called the Leading edge and the back spar is the Trailing edge. The sticks running perpendicular to the motorstick are called spars. There are also other ways of mounting the wings on the motorstick besides the tubes. One or two sets of these are glued to tougher (higher-density balsa or basswood) sticks, and inserted into paper tubes on the fuselage of the airplane (so that the wings can be disassembled from the fuselage for storage/transportation). Wing assembly A frame made of sticks of low-density balsa wood glued together, covered and glued with a thin covering made of paper or plastic. However, there is no longer a mass requirement for the rubber motor.Īn example device for Wright Stuff showing these six major partsĪ typical Wright Stuff airplane contains six major parts: The airplane can be of any design, though it must conform to rules regarding maximum wing and stabilizer dimensions, as well as a minimum mass limit (of the entire airplane, not including the rubber loop). The event involves making, testing, and flying an airplane powered by a twisted rubber band, with the goal of achieving the longest flight duration. Wright Stuff is a Division B event for the 20 seasons and a Division C event for the 2019, 2020, 2021, and 2022 seasons. Prior to the competition teams design, construct and test free flight rubber-powered monoplanes to achieve maximum time aloft.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |